Optimization of biodiesel production via transesterification of soybean oil using α-MoO3 catalyst obtained by the combustion method

A catalyst based on MoO₃ was synthesized by a simple and fast pilot-scale combustion reaction method and applied to the conversion of soybean oil to biodiesel via transesterification. For that, the statistical analysis of the catalyst amount and temperature, factors that influence the process, was evaluated by means of central composite design 2². MoO₃ was characterized in terms of structure by X-ray diffraction (XRD), textural characterization Brunauer-Emmett-Teller (BET), density by helium pycnometry (DE), particle size analysis (DG) and acidity tests by temperature-programmed desorption of ammonia (NH₃-TPD), chemical analysis by X-ray fluorescence (EDX), morphology by scanning electron microscopy (SEM) and catalytic properties. The transesterification products were characterized by gas chromatography (GC), acidity index (AI) and kinematic viscosity (KV). The results indicate the catalyst formation with a surface area of 1.36 m²g^?1, and density of 4.5 g/cm³ which consists of a single crystalline phase of orthorhombic configuration, with total NH₃ acidity of 33.61 μ.mol/g. Morphological characterization revealed that the catalyst is formed by irregular plates of various sizes and shapes, with a wide sizes range of agglomerated particles. In the soybean oil transesterification reactions, the catalyst was active showing 96.9% conversion to ethyl esters. The experimental design was meaningful and predictive, with a reliability level of 95%. The statistical analysis identified temperature as a significant variable for the adopted planning. To conclude, a new single-phase catalyst (α-MoO₃) has been developed and successfully applied to the biodiesel Synthesis from soybean oil. These results have a positive and promising impact for biodiesel production by transesterification of soybean oil against ethanol.     

A lightweight cell switching and traffic offloading scheme for energy optimization in ultra-dense heterogeneous networks

One of the major capacity boosters for 5G networks is the deployment of ultra-dense heterogeneous networks (UDHNs). However, this deployment results in a tremendous increase in the energy consumption of the network due to the large number of base stations (BSs) involved. In addition to enhanced capacity, 5G networks must also be energy efficient for it to be economically viable and environmentally friendly. Dynamic cell switching is a very common way of reducing the total energy consumption of the network, but most of the proposed methods are computationally demanding, which makes them unsuitable for application in ultra-dense network deployment with massive number of BSs. To tackle this problem, we propose a lightweight cell switching scheme also known as Threshold-based Hybrid cEll swItching Scheme (THESIS) for energy optimization in UDHNs. The developed approach combines the benefits of clustering and exhaustive search (ES) algorithm to produce a solution whose optimality is close to that of the ES (which is guaranteed to be optimal), but is computationally more efficient than ES and as such can be applied for cell switching in real networks even when their dimension is large. The performance evaluation shows that THESIS significantly reduces the energy consumption of the UDHN and can reduce the complexity of finding a near-optimal solution from exponential to polynomial complexity.     

Ultrahigh Loading Copper Single Atom Catalyst for Palladium-free Wacker Oxidation

Wacker oxidation is an industry-adopted process to transform olefins into value-added epoxides and carbonyls. However, traditional Wacker oxidation involves the use of homogeneous palladium and copper catalysts for the olefin addition and reductive elimination. Here, we demonstrated an ultrahigh loading Cu single atom catalyst(14% Cu, mass fraction) for the palladium-free Wacker oxidation of 4-vinylanisole into the corresponding ketone with N-methylhydroxylamine hydrochloride as an additive under mild conditions. Mechanistic studies by ¹⁸O and deuterium isotope labelling revealed a hydrogen shift mechanism in this palladium-free process using N-methylhydroxylamine hydrochloride as the oxygen source. The reaction scope can be further extended to Kucherov oxidation. Our study paves the way to replace noble metal catalysts in the traditional homogeneous processes with single atom catalysts.     

Influence of ionic liquid counterions on activity and selectivity of ethylene trimerization using chromium-based catalysts in biphasic media

In recent years ionic liquids (ILs) have attracted much interest because of their widespread use in various fields. Several trimerization and oligomerization catalysts have been evaluated in ILs with different organic–inorganic hybrid structures. High catalytic activity and selectivity, easy product separation, and recycling of the catalyst are the advantages of a biphasic catalyst system compared to the homogeneous catalysts. In this study, the influence of IL counter-anions on activity and selectivity of the ethylene trimerization catalysts based on Cr-SNS-R was investigated. All synthesized materials were characterized using Fourier-transform infrared spectroscopy, ¹H NMR, ¹³C NMR, UV–Vis. spectroscopy, thin-layer chromatography, and elemental analysis (CHNS). In ethylene trimerization reaction, the dodecyl substituent in the SNS ligand exhibited better activity and selectivity than the butyl substituent. The results revealed that the presence of BF₄⁻ as a counter-anion in the IL led to an increase in activity and selectivity compared to Br⁻ and I⁻ counter-anions. It was found that the BF₄⁻ counter-anion plays a conclusive role in the development of 1-hexene activity and selectivity to a maximum amount of 71,132 g_1-C6/(g_Cr × h) and more than 99%, respectively. Finally, the catalyst was reused thrice without losing its 1-hexene selectivity.     

An organoantimony nitrate complex with azastibocine framework as water tolerant Lewis acid catalyst for the synthesis of 1,2-disubstitued benzimidazoles

A novel organoantimony complex of 6-cyclohexyl-6,7-dihydrodibenzo[c,f] [1,5]azastibocin-12(5H)-yl nitrate ( 2 ) was synthesized and systematically characterized by techniques such as NMR spectra, TG-DSC, and X-ray diffraction. It was found that the complex 2 exhibits relatively strong Lewis acidity (3.3 < Ho ≤ 4.8) and could be employed as a water tolerant Lewis acid catalyst for the synthesis of synthetically valuable benzimidazole derivatives starting from aldehydes and arylenediamines. This catalytic system shows excellent tolerance toward a wide variety of functional groups, such as methyl, methoxyl, fluoro, chloro, bromo, nitro, cyan, trifluoromethyl, 1-naphthaldehyde, furfural and n-butyl, together with facile reusability in 5 times scale enlarged synthesis.     

Nickel(II) Schiff base complex supported on nano‐titanium dioxide: A novel straightforward route for preparation of supported Schiff base complexes applying 2,4‐toluenediisocyanate

For the first time, a novel, straightforward and inexpensive route for immobilization of metals in Schiff base complex form is reported applying 2,4‐toluenediisocyanate as a precursor of primary amine group. A nickel(II) Schiff base complex supported on nano‐TiO₂ was designed and synthesized as an effective heterogeneous nanocatalyst for organic reactions, and well characterized using various techniques such as Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, energy‐dispersive X‐ray analysis and thermogravimetric analysis. The catalytic efficiency of the complex was evaluated in selective oxidation of sulfide to sulfoxide by hydrogen peroxide as an oxidant under solvent‐free conditions at room temperature, which successfully resulted in high yield and high conversion of products. Effective factors including solvent type, oxidant and catalyst amount were also optimized. The catalyst shows outstanding reusability and could be impressively recovered for six consecutive cycles without significant change of its catalytic efficiency.     

Catalytic Generation and Chemoselective Transfer of Nucleophilic Hydrides from Dihydrogen

Copper(I)–N-heterocyclic-carbene (NHC) complexes enabled the catalytic generation of nucleophilic hydrides from dihydrogen (H₂) and their subsequent transfer to allylic chlorides. The highly chemoselective catalyst displayed no concomitant hydrogenation reactivity; in fact, the terminal double bond formed in the hydride transfer remained intact. Switching to deuterium gas (D₂) allowed for regioselective monodeuteration with excellent isotope incorporation.     

Stereoselective Insertion of Benzynes into Lawsones: Synthesis of Biologically Important Benzannulated Bicyclo[3.3.0]octanes

An ideal stereoselective insertion of in situ generated benzynes into lawsones through domino formal [2+2]-cycloaddition followed by rearrangement is disclosed. The reaction allowed for the preparation of biologically important benzannulated bicyclo[3.3.0]octanes in good yields and with excellent selectivities by using simple substrates and conditions.     

Rate and Computational Studies for Pd-NHC-Catalyzed Amination with Primary Alkylamines and Secondary Anilines: Rationalizing Selectivity for Monoarylation versus Diarylation with NHC Ligands

The relative rates of arylation of primary alkylamines with different Pd-NHC catalysts have been measured, as have the relative rates of arylation of the secondary aniline product in an attempt to understand the key ligand design features necessary to have high selectivity for the monoarylated amine product. As the substituents on the N-aryl ring of the NHC increase in size, selectivity for monoarylation increases and this is further enhanced by chlorinating the back of the NHC ring. Computations have been performed on the catalytic cycle of this transformation in order to understand the selectivity obtained with the different catalysts.